StarTech.com FCREADU3C manual

StarTech.com FCREADU3C
(1)
  • Número de páginas: 2
  • Tipo de archivo: PDF

Instruction manual

FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 08/09/2016
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/FCREADU3C.

Package contents

1 x multi-card reader and writer
1 x instruction manual

System requirements

microSD™ card, SD™ card, or CompactFlash® card
Computer, tablet, or device enabled with a USB Type-C™ port
The FCREADU3C is OS independent and doesn’t require any
additional drivers or software. The FCREADU3C receives enough
power through the USB bus and doesn’t require an additional power
source.
System requirements are subject to change. For the latest
requirements, please visit www.StarTech.com/FCREADU3C.

FCREADU3C

USB 3.0 Flash Memory Multi-Card Reader/Writer with USB-C

*actual product may vary from photos

Introduction

The FCREADU3C provides a quick and easy way to access data stored
on dierent types of media cards, and supports data transfers at
speeds up to 5Gbps. You can use this card reader with a computer,
tablet, or device that’s enabled with a USB-C™ port.

Product diagram

SD card slot
microSD card slot
CompactFlash card slot
USB-C plug

About USB 3.0 and USB 3.1 Gen 1

USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard
oers speeds up to 5Gbps.
Note: Data transfer rates are dependent upon the speed of the
memory card you are using and the speed capabilities of the USB
port on your host device.

Card support

The FCREADU3C supports the following types of memory cards:
microSD, microSDHC™, microSDXC™
CompactFlash Type I and Type II card
Secure Digital (SDSC), Secure Digital eXtended Capacity (SDXC™)
card, Secure Digital High Capacity (SDHC™) card

Use the FCREADU3C

1. Gently slide a memory card into the appropriate card slot on the
FCREADU3C until you feel resistance and the card is fully inserted.
2. Insert the USB-C plug on the USB card reader into the USB port
on your computer, tablet, or device.
3. To access content on the USB card reader, follow the instructions
specic to the OS that youre running.
Note: Avoid inserting multiple cards into the card reader at the same
time. You can only access data stored on one card at a time.

Troubleshooting

I can’t access the data stored on my cards

If you’re experiencing issues when you try to access the data stored
on your memory card, consider the following:
Some operating systems may not support all le formats. Make
sure that the operating system you’re using supports the type of
memory card and the les that you’re trying to access.
If you insert multiple memory cards into the FCREADU3C, you
won’t be able to access the data stored on the cards at the same
time. Make sure that you only insert one memory card in the card
reader.
Note: The FCREADU3C prioritizes card access based on the most
recent memory card that was inserted.
StarTech.com FCREADU3C

¿Necesitas ayuda?

Número de preguntas: 0

¿Tienes alguna pregunta sobre StarTech.com FCREADU3C o necesitas ayuda? Haz tu pregunta aquí. Proporciona una descripción clara y completa de tu consulta. Cuantos más detallada sea tu consulta, más fácil será para otros StarTech.com FCREADU3C propietarios responder adecuadamente a tu pregunta.

Ver el manual de StarTech.com FCREADU3C aquí, gratis. Este manual pertenece a la categoría Lectores de memoria y ha sido calificado por 1 personas con un promedio de 6.5 . Este manual está disponible en los siguientes idiomas: Inglés . ¿Tienes alguna pregunta sobre StarTech.com FCREADU3C o necesitas ayuda? Haz tu pregunta aquí

StarTech.com FCREADU3C especificaciones

General
Marca StarTech.com
Modelo FCREADU3C
Producto Lector de memoria
EAN 65030866934
Idioma Inglés
Tipo de archivo PDF
Desempeño
Tarjetas de memoria compatibles CF,MMC,MicroSD (TransFlash),MicroSDHC,MicroSDXC,SD,SDHC,SDXC
Velocidad de transferencia de datos 5000 Mbit/s
Color del producto Black,Silver
Material de la cubierta Aluminium,Plastic
Certificación CE, FCC, RoHS
Interno No
Conectar y usar (Plug and Play) Si
Puertos e Interfaces
Tipo de interfaz USB 3.2 Gen 1 (3.1 Gen 1) Type-C
Cantidad de puertos USB 3.2 Gen 1 (3.1 Gen 1) 0
Cable USB integrado Si
Condiciones ambientales
Intervalo de temperatura operativa (T-T) -20 - 70 °C
Intervalo de temperatura de almacenaje -20 - 75 °C
Intervalo de humedad relativa para funcionamiento 5 - 90 %
Peso y dimensiones
Ancho 64 mm
Profundidad 68 mm
Altura 14 mm
Peso 68 g
Empaquetado de datos
Peso del paquete 104 g
Alto del paquete 31 mm
Largo del paquete 104 mm
Ancho del paquete 129 mm
Contenido del empaque
Guía de configuración rápida Si
Detalles técnicos
Organización de los chips Realtek - RTS5309
mostrar más

Preguntas frecuentes

A continuación, encontrarás las preguntas más frecuentes sobre StarTech.com FCREADU3C.

¿No aparece tu pregunta? Haz tu pregunta aquí